16EDRIVE Replacement Parts

BRUSHLESS MOTOR KIT

$325.00

WE ALWAYS WANT MORE … POWER!

If your kiddo is getting radder by the day, they are probably seeking more… More POWER that is… AND we’ve got the answer! The ALL NEW Brushless Motor Kits will unlock a new level of performance and fun. With over 20% more power at peak RPM, this hopped up motor kit will provide a drastic increase in bottom end torque that pulls well into the bikes power range. More power means, More terrain options, More aggressive riding and ultimately More adventure on your STACYC!

High Output Brushless Motor

20% more power and than stock 16eDrive
10% more efficient than stock 16eDrive
Increased durability
No fuse
Thermal protection for motor and controller
Power selection modes:
- Low/Training mode ~ 5mph
- Med/Standard mode ~ 7.5mph
- High/Advanced mode ~ 13mph (with stock gear ratio)

Kit Includes

Brushless motor and controller
Vented side panels
Gearbox and transmission
Requires existing counter shaft sprocket

*Side panel screws not included*

*Please note that STACYC graphics kits do not work with the updated side panels used on the brushless motor upgrade kit*

View full product details

Brushless Motor/ESC

$230.00

OE Replacement brushless Motor and ESC for the BL 16eDrive

Gearboxes not included

*Note: if you are replacing a brushed motor with the brushless motor, the vented side panels will be required to complete the installation

View full product details

90 DEG GEARBOX UPGRADE KIT

$99.00

The 90 Deg Gearbox Upgrade kit offers machined gears with larger teeth giving them deeper engagement and more surface area, in turn making them stronger.

Perfect for more "aggressive" riders.

Fits 12/16eDrive models only.

View full product details

GEARBOX - 12.96

$13.00

REPLACEMENT GEARBOX FOR 16EDRIVE View full product details

REPLACEMENT THROTTLE

$70.00

Replacement Throttle and Wire Harness for STACYC with grip, on/off, LED.

Fits both 12eDrive and 16eDrive Models

View full product details

19mm MINI BAR CONVERSION KIT (25.4mm)

$99.00

SMALLER DIAMETER. BETTER GRIP.

The STACYC 19mm Handlebar Conversion Kit is purpose-built to give your little ripper better grip and more control. The kit upgrades 12eDRIVE and 16eDRIVE bikes to the 19mm diameter MINI BAR with 28% smaller grip diameter. By reducing the grip diameter kids are able to fully grasp the handlebar the same way an adult rider grasps a traditional size handlebar. Better grip, more control, increased confidence.

- 28% smaller grip diameter allows kids to fully grasp the handlebar, providing more comfort and control
- Smaller diameter offers a better hold on the handlebar while operating the brake
- Complete Kit mounts in your original 25.4mm stem (black stem) on 12eDRIVE and 16eDRIVE models
- Kit includes; 19mm handlebar, throttle assembly with wire, grips, bar plugs, shim for brake perch
- Updated throttle assembly modeled after the 18eDRIVE and 20eDRIVE with on/off button and LED indicator lights

Handlebar Dimensions:
- 560mm width
- 45mm height
- 21mm sweep
- 25.4mm (1in.) clamp diameter

* Not compatible with silver, blue or orange stems or stems installed with a bar riser kit. View the LE 22.2mm conversion kit for these applications.

View full product details

19mm MINI BAR LE CONVERSION KIT (22.2mm)

$99.00

SMALLER DIAMETER. BETTER GRIP.

The STACYC 19mm Handlebar Conversion Kit is purpose-built to give your little ripper better grip and more control. The kit upgrades 12eDRIVE and 16eDRIVE bikes to the 19mm diameter MINI BAR with 28% smaller grip diameter. By reducing the grip diameter kids are able to fully grasp the handlebar the same way an adult rider grasps a traditional size handlebar. Better grip, more control, increased confidence.

- 28% smaller grip diameter allows kids to fully grasp the handlebar, providing more comfort and control
- Smaller diameter offers a better hold on the handlebar while operating the brake
- Complete Kit mounts in your 22.2mm stem (22.2mm clamp diameter stems are any stem installed with a bar riser kit, or all silver, cyan/blue or orange anodized stems) on 12eDRIVE and 16eDRIVE models
- Kit includes; 19mm handlebar, throttle assembly with wire, grips, bar plugs, shim for brake perch
- Updated throttle assembly modeled after the 18eDRIVE and 20eDRIVE with on/off button and LED indicator lights

Handlebar Dimensions:
- 560mm width
- 45mm height
- 21mm sweep
- 22.2mm (7/8 in.) clamp diameter

* Not compatible with OEM black stems. View the 25.4mm conversion kit for STACYC bikes with OEM black stems.

View full product details

19MM REPLACEMENT THROTTLE - 12e/16eDRIVE

$70.00

Replacement 19mm Throttle assembly and Wire Harness with grip.

Fits both 12eDRIVE and 16eDRIVE Models with 19mm Mini Bar.

*Will NOT fit 12e/16e with 7/8" handlebars (outside diameter where throttle mounts). Also will NOT fit 18e/20e.

View full product details

THROTTLE LED COVER 12/16

$1.00

THROTTLE ASSEMBLY LED COVER 12/16

Replacement throttle LED cover
Fits original 12eDRIVE and 16eDRIVE throttle assemblies with on/off switch (not 19mm assembly with on/off button)

View full product details