STACYC 12eDRIVE

$799.00

KIDS BOLT LOGO TEE - BLACK

$25.00

Size XS SM MD LG

Size

XS

SM

MD

LG

Add to Cart

Let all your friends know that you #RideStacyc !

Large bolt logo on front, stacked logo on rear. 

19mm MINI BAR CONVERSION KIT (25.4mm)

$99.00

SMALLER DIAMETER.  BETTER GRIP.

The STACYC 19mm Handlebar Conversion Kit is purpose-built to give your little ripper better grip and more control.  The kit upgrades 12eDRIVE and 16eDRIVE bikes to the 19mm diameter MINI BAR with 28% smaller grip diameter.  By reducing the grip diameter kids are able to fully grasp the handlebar the same way an adult rider grasps a traditional size handlebar.  Better grip, more control, increased confidence.

- 28% smaller grip diameter allows kids to fully grasp the handlebar, providing more comfort and control
- Smaller diameter offers a better hold on the handlebar while operating the brake
- Complete Kit mounts in your original 25.4mm stem (black stem) on 12eDRIVE and 16eDRIVE models
- Kit includes; 19mm handlebar, throttle assembly with wire, grips, bar plugs, shim for brake perch
- Updated throttle assembly modeled after the 18eDRIVE and 20eDRIVE with on/off button and LED indicator lights

Handlebar Dimensions:
- 560mm width
- 45mm height
- 21mm sweep
- 25.4mm (1in.) clamp diameter

* Not compatible with silver, blue or orange stems or stems installed with a bar riser kit. View the LE 22.2mm conversion kit for these applications.

GRAPHICS KIT, BRUSHED CAMO WHT

$55.00

OFFICIAL STACYC GRAPHICS KIT FOR 12eDRIVE and BRUSHED 16eDRIVE (non-vented side panels)

GRAPHICS KIT - DARE DEVIL

$55.00

Full wrap graphics kit for 12 or 16eDrives. Red, White and Blue... Stars and Bars, what more could your kiddo ask for!! Kits do not include numbers or names.

*COMPATIBILITY: 12eDrive, 16eDrive (BRUSHED - no side panel venting)*

STACYC NUMBER PLATE KIT BLACK

Sold Out $25.00

STACYC NO-TOOL MOTO STAND

Sold Out $60.00

The STACYC No-Tool Moto Stand is a must-have in the garage or at the track to keep STACYC Electric Balance Bikes off the ground between riding sessions. Designed to support any size STACYC from 12eDRIVE up to 20eDRIVE.

• Moto-style stand to keep STACYC Electric Balance Bikes off the ground
• Light-weight injection molded plastic supports any size STACYC
• No-tools, simple assembly using supplied nylon push-pin rivets and snap-together design
• Assembled dimensions 12”x12”x9.5” tall
• 40 lbs. maximum load capacity

STACYC 16eDRIVE BRUSHLESS

$1,049.00

THE ONLY BIKE FOR FUTURE RIPPERS

 

The ALL NEW Brushless 16” eDRIVE comes stock with our new High-Output Brushless Motor right out of the box. Our new upgraded motor packs a punch with additional low-end power and torque allowing for more aggressive riding on more varied terrain.

 

The STACYC 16eDRIVE is the perfect choice for little rippers with some experience on a balance bike and are a little taller and/or more familiar with riding STACYC Stability Cycles and need a larger platform. Your child should have an inseam of 18” or more to adequately touch the ground with a slight bend in the knees for optimum sizing. Your child can learn to push, balance, and coast in the Non-powered mode. Graduate them to the powered mode (the holy grail of fun) as they show proficient use and understanding of the brake and the ability to coast and brake while standing. Start them with a speed similar to what they can push the non-powered version at, and they learn the use of the twist throttle, and a long coast turn into a constant use of throttle and giggles. As they continue to develop skills, the medium speed of the STACYC 16eDRIVE allows for an exceptional amount of fun outdoors, getting thousands of hours of hand-eye coordination, balance, and outdoor exercise.

 

Perfect for 5-7yr old rippers under 75lbs, with 18-24” inseam

• Frame: Aluminum TIG Welded and Heat Treatment
• 16” Composite Wheels with Pneumatic tires
• Seat Height: 17″
• Weight: 20lbs with battery
• High Output Brushless Motor

High Output Brushless Motor

• 20% more power and than original 16eDRIVE
• 10% more efficient than original 16eDRIVE
• Increased durability
• No fuse
• Thermal protection for motor and controller
• Power selection modes:
  • Low/Training mode ~ 5mph
  • Med/Standard mode ~ 7.5mph
  • High/Advanced mode ~ 13mph (with stock gear ratio)

 

Industrial Grade, Lithium-ion Battery and Charger*

• Quick disconnect/connect battery
• 20Vmax Voltage (18Vnom)
• 4Ah
• 30-60 min run-time**
• 30-60 charge time

*1 battery and charger included
**Run-time is entirely dependent on terrain, hills, and skill level. Run-times are estimates and can vary.

***Currently only shipping to US locations. Please contact us for international requests.

 

H-D 16eDRIVE BRUSHLESS

$1,049.00

THE ONLY BIKE FOR FUTURE RIPPERS

The Brushless STACYC H-D 16eDRIVE comes stock with our new High-Output Brushless Motor right out of the box. Our new upgraded motor packs a punch with additional low-end power and torque allowing for more aggressive riding on more varied terrain.

The STACYC H-D 16eDRIVE is the perfect choice for Little Rippers with some experience on a balance bike and are a little taller and/or more familiar with riding a STACYC Stability Cycles and need a larger platform. Your child should have an inseam of 18” or more to adequately touch the ground with a slight bend in the knees for optimum sizing. Your child can learn to push, balance, and coast in the non-powered mode. Then, graduate them to the powered mode (the holy grail of fun) as they show proficient use and understanding of the brake and the ability to coast and brake while standing. Start them with a speed similar to what they can push the non-powered version at, and they learn the use of the twist throttle, and a long coast turns into a constant use of throttle and giggles. As they continue to develop skills, the medium and high speeds of the STACYC H-D 16eDRIVE allows for an exceptional amount of fun outdoors, getting thousands of hours of hand-eye coordination, balance, and outdoor exercise.

Perfect for 5-7yr old rippers under 75lbs, with 18-22” inseam

• Frame: Aluminum TIG Welded and Heat Treatment
• 16” Composite Wheels with Pneumatic tires
• Seat Height: 17″
• Weight: 19lbs with battery
• High Output Brushless Motor

High Output Brushless Motor

• 20% more power and than original 16eDRIVE
• 10% more efficient than original 16eDRIVE
• Increased durability
• No fuse
• Thermal protection for motor and controller
• Power selection modes:
  • Low/Training mode ~ 6mph
  • Med/Standard mode ~ 8mph
  • High/Advanced mode ~ 13.5mph (with stock gear ratio)

Industrial Grade, Lithium-ion Battery and Charger*

• Quick disconnect/connect battery
• 20Vmax Voltage (18Vnom)
• 4Ah
• 30-60 min run-time**
• 30-60 charge time

*1 battery and charger included

**Run-time is entirely dependent on terrain, hills, and skill level. Run-times are estimates and can vary.

GRAPHICS KIT, BL16 CAMO WHT

$55.00

GRAPHICS KIT, BL16 CAMO PNK

$55.00

EXTENDED FOOTREST - CYAN

$55.00

Is your little ripper outgrowing the stock STACYC foot rest? CNC machined from solid billet aluminum and hard anodized, this extended foot rest kit will add room for more contact.

*Not compatible with 18/20EDrive models

DELUXE CARRY BAG

$150.00

The STACYC Deluxe Bike Bag is a durable, soft-shell bag with internal plastic panels designed to keep your STACYC safe while on the go.  Featuring stowable backpack straps and multiple carry handles to make transporting easier on the pit crew.  

• Plastic boards in top and bottom panels to create a rigid structure and protect the bike
• Removable plastic board in side panels can be added for additional structure or removed to allow the bag to pack flat
• Webbing tie-down straps inside the bag to hold your bike in place during transit
• Foam throttle and brake covers included to protect your controls
• Includes backpack straps with adjustable length shoulder straps
• Backpack straps can be stored inside zipper pocket so the bag can be used with and without backpack straps
• Foam back pads for additional comfort when wearing as a backpack
• Carry handle with ergonomic plastic grip at side of the bag
• Webbing handle at the top of the bag
• Constructed with durable 600D material
• Molle loop attachment on inside of the bag to hold Tailgate Pad accessory pocket (accessory pocket not included)
• 16eDRIVE shown. Further disassembly required for larger STACYCs.